language

Home

Products

Aluminized Steel Coil 0.5mm Thickness

0.5mm aluminized steel coil is one of the most widely used thin-gauge specifications in industrial manufacturing. It provides

Keywords:

Aluminized Steel Coil 0.5mm Thickness

Category:

Aluminized Steel Coil / Tube

Inquiry Now

Send E-mail

File Download

sales1@tedaganghua.com

+86 22 86896631、+86 15822676888

Product Details

0.5mm aluminized steel coil is one of the most widely used thin-gauge specifications in industrial manufacturing. It provides a balanced combination of strength, formability, heat resistance, and material efficiency, making it a preferred choice for lightweight components that require long-term oxidation protection.

Compared with thinner 0.3mm material and thicker 0.6mm material, 0.5mm offers a practical middle ground. It provides enough rigidity for structural stability while maintaining good stamping and bending performance.

What Is 0.5mm Aluminized Steel Coil?

A 0.5mm aluminized steel coil refers to a steel coil with a nominal thickness of approximately 0.5mm and an aluminum-silicon coating applied through a continuous hot-dip aluminizing process. This thickness is considered a mainstream light-gauge specification for industrial applications.

Specification Item	Typical Range
Nominal Thickness	0.5mm
Common Width	600mm–1250mm
Coil Form	Continuous coil supply
Processing Options	Slitting, leveling, cut-to-length
Main Advantage	Balance between strength and forming ability

Why 0.5mm Is a Popular Light-Gauge Choice

Among thin aluminized steel specifications, 0.5mm is often selected because it avoids the limitations of ultra-thin gauges while remaining lightweight.

Main Advantages of 0.5mm Thickness:
• Better rigidity than 0.3mm and 0.4mm gauges
• Suitable for common stamping operations
• Good bending performance
• Lower weight compared with medium thickness steel
• Widely available for industrial production

Typical Applications of 0.5mm Aluminized Steel Coil

The combination of heat resistance and mechanical balance makes 0.5mm aluminized steel suitable for many automotive, appliance, and industrial applications.

Application	Reason for Selection
Automotive Exhaust Components	Heat resistance and oxidation protection
Oven Components	Stable performance at elevated temperatures
Fan Covers	Lightweight structure with corrosion resistance
Electrical Appliance Housings	Good appearance and fabrication efficiency
Elbow Heat Shields	Thermal protection requirements

Forming Performance of 0.5mm Aluminized Steel

The 0.5mm thickness provides better forming capability than ultra-thin gauges while maintaining sufficient stiffness. It can be processed by bending, stamping, and roll forming when suitable tooling conditions are used.

Processing Method	Performance
Bending	Suitable with recommended bending radius
Stamping	Suitable for light and medium forming
Roll Forming	Good processing stability
Deep Drawing	Depends on material grade and design

Recommended Bending Considerations

For many applications, a bending ratio of approximately R/t ≥ 1–2 is commonly considered during design. The actual value depends on coating type, forming direction, tooling condition, and required surface quality.

To Reduce Coating Damage:
• Avoid sharp bending corners
• Select proper tooling radius
• Control forming speed
• Inspect coating condition after forming

0.5mm vs 0.4mm vs 0.6mm Thickness Selection

Choosing between adjacent thicknesses depends on the balance between weight, stiffness, and forming requirements.

Thickness	Advantages	Typical Use
0.4mm	Lower weight, flexible	Light covers and thin parts
0.5mm	Best overall balance	General industrial components
0.6mm	Higher rigidity	Higher load requirements

0.5mm Aluminized Steel Coil Size and Supply

The standard width range for 0.5mm aluminized steel coil is commonly around 600mm to 1250mm. Coil weight depends on width, outer diameter, and customer requirements.

Supply Item	Details
Width	600mm–1250mm common range
Coil Delivery	Full coil or processed strip
Customization	Slitting and cut-to-length available

Teda Ganghua 0.5mm Aluminized Steel Coil Supply

Teda Ganghua supplies aluminized steel products for industrial customers requiring stable quality, customized dimensions, and fabrication support. The 0.5mm specification is available for applications requiring a reliable balance of strength, formability, and heat resistance.