Products
Contact Us
5005 Aluminum Sheet
Keywords:
Category:
Product Details
5005 aluminum sheet is a non-heat-treatable aluminum-magnesium alloy widely used for architectural and decorative applications. It offers good corrosion resistance, excellent anodizing response, and moderate strength.
This alloy is commonly selected where a consistent surface finish and good appearance after anodizing are required.
Chemical Composition (Typical)
5005 belongs to the Al-Mg alloy series, with magnesium as the main strengthening element.
| Element | Content (%) | Function |
|---|---|---|
| Magnesium (Mg) | 0.5 – 1.1 | Improves strength and corrosion resistance |
| Manganese (Mn) | ≤ 0.20 | Enhances stability and mechanical properties |
| Iron (Fe) | ≤ 0.70 | Impurity control |
| Silicon (Si) | ≤ 0.30 | Improves processing stability |
| Aluminum (Al) | Balance | Base metal |
Mechanical Properties
- Moderate strength among Al-Mg alloys
- Excellent corrosion resistance in atmospheric environments
- Very good formability for sheet processing
- Excellent anodizing performance with uniform surface color
Typical characteristics:
- Better surface appearance after anodizing compared to 3003
- Good weldability
- Stable performance in architectural applications
Key Performance Features
1. Excellent Anodizing Quality
5005 aluminum is widely used for anodized finishes because:
- Produces uniform and consistent color
- Suitable for decorative architectural panels
- Reduces surface color variation after treatment
2. Good Corrosion Resistance
- Performs well in atmospheric and urban environments
- Resistant to moisture and mild industrial conditions
- Suitable for long-term outdoor exposure
3. Good Formability
- Easy to bend, roll, and fabricate
- Suitable for complex architectural shapes
- Maintains surface quality after forming
4. Moderate Strength
- Stronger than pure aluminum grades
- Not intended for heavy structural load applications
- Ideal for lightweight architectural use
Common Applications of 5005 Aluminum Sheet
1. Architectural and Building Facades
- Curtain wall panels
- Exterior cladding systems
- Decorative building facades
2. Anodized Decorative Panels
- Interior and exterior decorative surfaces
- Color-consistent architectural elements
- Signage and branding panels
3. Transportation Industry
- Vehicle body panels
- Interior trim components
- Lightweight structural covers
4. Industrial and General Fabrication
- Electrical enclosures
- Equipment housings
- Protective covers and panels
Product Inquiry
Relevant Products
TIANJIN TEDA GANGHUA
Tel: +86 22 86896631
Phone: +86 15822676888
Fax: +86 22 86896632
E-mail: sales1@tedaganghua.com
Office Hours:Mon – Fri / 9:00 AM – 6:00 PM
Address:Beichen Industrial Area, Beichen District, Tianjin 300400 China
Room A3101, Section 2, No. 122, Dongting Road, Tianjin Development Zone
Leave a message online
Copyright © 2023 TIANJIN TEDA GANGHUA