Products
Contact Us
Aluminium Sheet Roll
Keywords:
Category:
Product Details
Aluminium sheet roll, also known as aluminium coil, is a continuous rolled form of aluminium sheet supplied in coil shape. It is widely used for cutting, stamping, bending, and fabrication into various industrial and architectural products.
Compared with flat sheets, aluminium coils offer higher efficiency in mass production and continuous processing.
Common Width Specifications
Aluminium sheet rolls are typically produced in standard industrial widths to match global processing equipment.
Standard Width Range:
- 100 mm – 500 mm (narrow coil for special applications)
- 600 mm – 1000 mm (medium coil)
- 1000 mm – 1250 mm (standard industrial coil)
- 1250 mm – 1500 mm (wide coil for large-scale production)
The most commonly used widths in industrial markets are 1000 mm, 1219 mm, and 1250 mm.
Common Length Specifications
Since aluminium sheet is supplied in coil form, length is flexible and depends on coil weight and thickness.
Typical Coil Length Range:
- Small coils: 100 – 500 meters
- Standard coils: 500 – 2000 meters
- Large industrial coils: 2000 meters and above
Actual length varies based on:
- Thickness of the material
- Coil weight requirement
- Production and transportation limits
Thickness Range for Aluminium Coils
Aluminium sheet rolls are available in a wide range of thicknesses:
- Thin gauge: 0.2 mm – 1.0 mm
- Medium gauge: 1.0 mm – 3.0 mm
- Heavy gauge: 3.0 mm – 6.0 mm
Thinner coils are commonly used for packaging and decoration, while thicker coils are used for structural and industrial fabrication.
Common Alloy Grades in Coil Form
Aluminium sheet rolls are available in multiple alloy series depending on application requirements:
- 1050 / 1060: Pure aluminum, high formability
- 1100: General-purpose industrial use
- 3003: Roofing, HVAC, and general fabrication
- 5005: Architectural and anodizing applications
- 5052: Marine and corrosion-resistant use
- 6061: Structural and mechanical applications
Typical Applications
Aluminium sheet rolls are widely used in:
- Roofing and cladding systems
- HVAC ducting and insulation
- Packaging and container production
- Automotive and transportation components
- Industrial stamping and fabrication
- Building decoration and architectural systems
Product Inquiry
Relevant Products
TIANJIN TEDA GANGHUA
Tel: +86 22 86896631
Phone: +86 15822676888
Fax: +86 22 86896632
E-mail: sales1@tedaganghua.com
Office Hours:Mon – Fri / 9:00 AM – 6:00 PM
Address:Beichen Industrial Area, Beichen District, Tianjin 300400 China
Room A3101, Section 2, No. 122, Dongting Road, Tianjin Development Zone
Leave a message online
Copyright © 2023 TIANJIN TEDA GANGHUA