Products
Contact Us
SS Sheet Coil
Keywords:
Category:
Product Details
SS sheet coil refers to stainless steel in continuous rolled form (coil form), which is widely used as the raw material for stainless steel sheets, strips, and cut-to-size plates. Stainless steel coils are commonly supplied in both cold rolled and hot rolled conditions, depending on the application requirements.
Compared with stainless steel plates, coil form offers higher production efficiency and flexible length cutting, making it one of the most important formats in stainless steel supply chains.
What Is SS Sheet Coil?
SS sheet coil is a long strip of stainless steel that is rolled into a coil for easy transportation, storage, and further processing. It is later uncoiled, leveled, and cut into sheets or strips according to customer needs.
Common grades include:
- 201 stainless steel coil
- 304 / 304L stainless steel coil
- 316 / 316L stainless steel coil
- 430 stainless steel coil
- 321 stainless steel coil
Common Width Specifications of Stainless Steel Coil
Stainless steel coils are typically produced in standard industrial widths:
| Width (mm) | Imperial Equivalent | Application |
|---|---|---|
| 1000 mm | 3.28 ft | Narrow processing |
| 1219 mm | 4 ft | Standard industrial size |
| 1250 mm | — | Common Asian standard |
| 1500 mm | 5 ft | Heavy-duty applications |
| 2000 mm | — | Wide coil for large fabrication |
Common Thickness Range of SS Sheet Coil
Stainless steel coils cover a wide thickness range depending on production method:
Cold Rolled Coil (CRC)
| Thickness | Use |
|---|---|
| 0.3 – 3.0 mm | Sheet fabrication, decoration, appliances |
Hot Rolled Coil (HRC)
| Thickness | Use |
|---|---|
| 3.0 – 16 mm+ | Structural and industrial heavy applications |
Common Coil Inner Diameter (ID) Standards
Stainless steel coils are also classified by inner diameter:
| Type | Inner Diameter |
|---|---|
| Standard Coil | 508 mm |
| Large Coil | 610 mm |
These dimensions ensure compatibility with uncoiling and processing equipment.
Common Coil Weight Range
Stainless steel coil weight depends on thickness, width, and length:
- Small coils: 3–5 tons
- Standard coils: 5–10 tons
- Heavy coils: 10–25 tons
Coil weight is important for transportation and processing efficiency.
Surface Finish Options for SS Sheet Coil
Different surface finishes are available depending on application:
- 2B finish (cold rolled standard surface)
- BA finish (bright annealed surface)
- No.1 finish (hot rolled, pickled)
- No.4 brushed finish (decorative use)
- Mirror polished coil (8K finish)
Common Processing Methods from Coil
Stainless steel coil is widely processed into:
- Stainless steel sheet (cut-to-size)
- Strip coils (narrow width slitting)
- Precision stamping parts
- Laser cut components
- Decorative panels
Applications of Stainless Steel Coil
- Construction and architectural panels
- Kitchen and food equipment
- Automotive components
- Industrial machinery parts
- Chemical processing systems
- Elevator decoration panels
- Home appliance manufacturing
Product Inquiry
Relevant Products
TIANJIN TEDA GANGHUA
Tel: +86 22 86896631
Phone: +86 15822676888
Fax: +86 22 86896632
E-mail: sales1@tedaganghua.com
Office Hours:Mon – Fri / 9:00 AM – 6:00 PM
Address:Beichen Industrial Area, Beichen District, Tianjin 300400 China
Room A3101, Section 2, No. 122, Dongting Road, Tianjin Development Zone
Leave a message online
Copyright © 2023 TIANJIN TEDA GANGHUA