Products
Contact Us
Corten Steel Wall Panels
Keywords:
Category:
Product Details
Corten steel wall panels are widely used in modern architectural cladding systems due to their natural weathering ability and stable corrosion-resistant performance. The material forms a protective rust layer on the surface, which helps improve durability while creating a distinctive architectural appearance.
One of the most important factors in design and installation is the standard panel size and thickness specification, which directly affects fabrication efficiency, structural performance, and installation method.
Common Thickness of Corten Steel Wall Panels
Corten wall panels are available in multiple thickness ranges depending on structural requirements:
| Thickness (mm) | Application |
|---|---|
| 1.0 – 2.0 mm | Decorative wall cladding |
| 2.0 – 3.0 mm | Standard architectural panels |
| 3.0 – 6.0 mm | Structural façade systems |
| 6.0 mm+ | Heavy-duty exterior structures |
👉 Thin panels are mainly used for decorative façades, while thicker plates are used for structural wall systems.
Standard Corten Steel Panel Sizes
Corten steel wall panels are typically produced in standard sheet formats or customized dimensions based on project design.
Common sheet sizes:
| Size (Feet) | Size (mm) | Usage |
|---|---|---|
| 4 × 8 ft | 1220 × 2440 mm | Most common standard panel |
| 5 × 10 ft | 1524 × 3048 mm | Large façade panels |
| 3 × 6 ft | 914 × 1828 mm | Small architectural panels |
| Custom size | Variable | Project-specific design |
Long Strip Panel Dimensions
For modern façade systems, long strip panels are also widely used:
- Width: 300 mm – 1500 mm
- Length: up to 6000 mm or customized
- Thickness: 1.5 – 4.0 mm commonly
👉 Long strip design is popular for contemporary building façades.
Modular Panel Systems
Corten steel wall panels are often designed in modular formats for easy installation:
Common module patterns:
- Horizontal panels
- Vertical panels
- Interlocking systems
- Cassette façade systems
Typical module sizes:
- 600 × 1200 mm
- 1000 × 2000 mm
- 1200 × 2400 mm
Custom Fabrication Sizes
In architectural projects, Corten steel panels are often custom-cut according to drawings:
Custom options include:
- Laser cutting shapes
- Perforated façade panels
- Folded cassette panels
- Irregular geometric designs
👉 Customization is very common in modern architectural design.
Why Standard Sizes Matter
Using standard or modular panel sizes helps:
- Reduce fabrication cost
- Improve installation efficiency
- Ensure structural alignment
- Minimize material waste
- Simplify transportation and handling
Corten Steel Panel Size Selection Guide
| Application | Recommended Size Type |
|---|---|
| Residential façade | 4×8 ft or modular panels |
| Commercial buildings | 5×10 ft or custom large panels |
| Artistic architecture | Custom laser-cut panels |
| Industrial buildings | Thick large-format panels |
Product Inquiry
Relevant Products
TIANJIN TEDA GANGHUA
Tel: +86 22 86896631
Phone: +86 15822676888
Fax: +86 22 86896632
E-mail: sales1@tedaganghua.com
Office Hours:Mon – Fri / 9:00 AM – 6:00 PM
Address:Beichen Industrial Area, Beichen District, Tianjin 300400 China
Room A3101, Section 2, No. 122, Dongting Road, Tianjin Development Zone
Leave a message online
Copyright © 2023 TIANJIN TEDA GANGHUA