Products
Contact Us
316 Ss Sheet Price
Keywords:
Category:
Product Details
316 stainless steel sheet is an austenitic stainless steel widely used in marine environments, chemical processing, and high-corrosion applications. While “316 stainless steel sheet price” is often searched in the market, the material performance—especially hardness and mechanical strength—is a key factor affecting its processing behavior and overall value.
Hardness of 316 Stainless Steel Sheet
The hardness of 316 stainless steel depends on its processing condition (annealed, cold rolled, or work hardened). In general, 316 has slightly similar hardness behavior to 304, but with improved corrosion resistance due to molybdenum content.
| Condition | Hardness (Typical HV) | Hardness (HRC Approx.) | Characteristics |
|---|---|---|---|
| Annealed (Soft) | 150–200 HV | ~10–20 HRC | Good formability, easy bending |
| Cold Rolled | 200–300 HV | ~20–28 HRC | Higher strength, reduced ductility |
| Work Hardened | >300 HV | >28 HRC | High strength, difficult forming |
316 vs 304 Stainless Steel Hardness Comparison
1. Basic Hardness Level
| Material | Hardness Level | Workability | Strength Behavior |
|---|---|---|---|
| 304 Stainless Steel | Moderate | Easier to form | Stable strength, standard work hardening |
| 316 Stainless Steel | Slightly higher or similar | Slightly harder to process | Stronger corrosion resistance, similar hardening rate |
In annealed condition, both materials have close hardness values, but 316 may feel slightly tougher due to alloy composition.
2. Mechanical Property Differences
| Property | 316 Stainless Steel | 304 Stainless Steel |
|---|---|---|
| Hardness | Slightly higher or similar | Standard baseline |
| Tensile Strength | Higher in corrosive environments | Standard general-purpose strength |
| Yield Strength | Comparable | Comparable |
| Work Hardening Rate | Similar | Similar |
| Ductility | Slightly lower | Slightly higher |
3. Processing Behavior Difference
316 Stainless Steel:
- Slightly higher resistance during cutting and forming
- More tool wear in machining operations
- Better performance in chloride and marine environments
- Requires stable cutting parameters
304 Stainless Steel:
- Easier to process and form
- Lower machining resistance
- Widely used for general fabrication
- Lower corrosion resistance compared to 316
4. Application Influence from Hardness and Performance
316 Stainless Steel Applications:
- Marine equipment and ship components
- Chemical processing equipment
- Pharmaceutical machinery
- Coastal architectural structures
- High-corrosion environments
304 Stainless Steel Applications:
- Kitchen equipment
- Food processing machinery
- General structural parts
- Indoor architectural decoration
- Standard industrial fabrication
Product Inquiry
Relevant Products
TIANJIN TEDA GANGHUA
Tel: +86 22 86896631
Phone: +86 15822676888
Fax: +86 22 86896632
E-mail: sales1@tedaganghua.com
Office Hours:Mon – Fri / 9:00 AM – 6:00 PM
Address:Beichen Industrial Area, Beichen District, Tianjin 300400 China
Room A3101, Section 2, No. 122, Dongting Road, Tianjin Development Zone
Leave a message online
Copyright © 2023 TIANJIN TEDA GANGHUA