Products
Contact Us
5052 H32 Aluminum Sheet
Keywords:
Category:
Product Details
5052 H32 Aluminum Sheet is one of the most widely used non-heat-treatable aluminum alloys in the 5000 series. The alloy is strengthened primarily by magnesium, providing excellent corrosion resistance, moderate-to-high strength, and outstanding formability. The H32 temper indicates that the material has been strain-hardened and then stabilized, offering a balance between strength and workability.
What Does H32 Mean?
The H32 temper designation represents:
- H: Strain hardened (work hardened)
- 3: Stabilized after cold working
- 2: Quarter-hard condition
Compared with O temper (annealed), H32 provides higher strength while maintaining good bending and forming performance.
Chemical Composition of 5052 Aluminum
| Element | Content (%) |
|---|---|
| Aluminum (Al) | Balance |
| Magnesium (Mg) | 2.2 – 2.8 |
| Chromium (Cr) | 0.15 – 0.35 |
| Silicon (Si) | ≤ 0.25 |
| Iron (Fe) | ≤ 0.40 |
| Copper (Cu) | ≤ 0.10 |
| Manganese (Mn) | ≤ 0.10 |
| Zinc (Zn) | ≤ 0.10 |
| Others | ≤ 0.15 |
The relatively high magnesium content is the primary reason for the alloy's excellent corrosion resistance and strength.
Mechanical Properties
| Property | Typical Value |
| Tensile Strength | 228–280 MPa |
| Yield Strength | ≥ 193 MPa |
| Elongation | 6–12% |
| Brinell Hardness | Approximately 60 HB |
| Density | 2.68 g/cm³ |
| Elastic Modulus | 70 GPa |
These properties make the alloy suitable for structural and fabrication applications that require strength without excessive weight.
Key Performance Advantages
Excellent Corrosion Resistance
5052 H32 performs exceptionally well in marine, coastal, and industrial environments. It offers better corrosion resistance than many 3000-series aluminum alloys.
Good Strength-to-Weight Ratio
The alloy provides significantly higher strength than 1050, 1060, and 3003 aluminum while maintaining a lightweight structure.
Outstanding Formability
Despite its increased strength, the material can still be bent, rolled, stamped, and fabricated into complex shapes.
Excellent Weldability
5052 H32 is compatible with common welding processes and retains good mechanical properties after welding.
Non-Magnetic Properties
Like most aluminum alloys, it is non-magnetic, making it suitable for applications where magnetic interference must be minimized.
Comparison with Other Common Aluminum Alloys
| Alloy | Strength | Corrosion Resistance | Formability |
| 1060 | Low | Excellent | Excellent |
| 3003 | Medium | Very Good | Excellent |
| 5052 H32 | High | Excellent | Very Good |
| 6061-T6 | Very High | Good | Moderate |
5052 H32 is often selected when superior corrosion resistance is required along with higher strength than standard commercial aluminum grades.
Typical Applications
Because of its balanced properties, 5052 H32 Aluminum Sheet is widely used in:
- Marine equipment
- Boat hull components
- Fuel tanks
- Pressure vessels
- Truck and trailer panels
- Architectural cladding
- Roofing systems
- Electrical enclosures
- Chemical processing equipment
- Storage tanks
Common Thickness Range
| Thickness | Typical Application |
| 0.5–1.5 mm | Decorative and lightweight panels |
| 1.5–3.0 mm | Vehicle and marine components |
| 3.0–6.0 mm | Structural fabrication |
| 6.0 mm and above | Heavy-duty industrial applications |
Product Inquiry
Relevant Products
TIANJIN TEDA GANGHUA
Tel: +86 22 86896631
Phone: +86 15822676888
Fax: +86 22 86896632
E-mail: sales1@tedaganghua.com
Office Hours:Mon – Fri / 9:00 AM – 6:00 PM
Address:Beichen Industrial Area, Beichen District, Tianjin 300400 China
Room A3101, Section 2, No. 122, Dongting Road, Tianjin Development Zone
Leave a message online
Copyright © 2023 TIANJIN TEDA GANGHUA