Products
Contact Us
Titanium Sheet For Sale
Keywords:
Category:
Product Details
Titanium Sheet For Sale is widely used in aerospace, chemical processing, marine engineering, medical equipment, and industrial manufacturing. One of the key factors in selecting titanium sheet is understanding the available standard sizes, thickness ranges, and sheet formats.
Titanium sheets are typically supplied according to ASTM and international standards, with flexible customization options for different engineering applications.
Standard Titanium Sheet Size
The most commonly available titanium sheet size is based on international industrial plate standards.
| Size Type | Dimension (mm) | Dimension (inch) |
|---|---|---|
| Standard Sheet | 1000 × 2000 mm | 39.37 × 78.74 in |
| Standard Sheet | 1220 × 2440 mm | 48 × 96 in |
| Large Format | 1500 × 3000 mm | 59 × 118 in |
The 4×8 ft (1220 × 2440 mm) sheet is the most widely used size in global markets due to ease of processing and transportation.
Common Titanium Sheet Thickness Range
Titanium sheets are available in a wide range of thicknesses depending on application requirements.
| Thickness (mm) | Thickness (inch) | Typical Use |
| 0.3 – 1.0 mm | Thin sheet | Chemical lining, medical devices |
| 1.0 – 3.0 mm | Standard sheet | Industrial fabrication |
| 3.0 – 6.0 mm | Medium plate | Marine and structural parts |
| 6.0 – 20 mm+ | Thick plate | Aerospace and heavy-duty components |
Common Titanium Grades Available
Titanium sheet products are usually supplied in both commercially pure and alloy grades:
Commercially Pure Titanium
- Grade 1: Highest formability, low strength
- Grade 2: Balanced strength and corrosion resistance
- Grade 3: Medium strength
- Grade 4: High strength CP titanium
Titanium Alloys
- Grade 5 (Ti-6Al-4V): High strength aerospace alloy
- Grade 7: Excellent corrosion resistance in acidic environments
- Grade 9: Balanced strength and formability
- Grade 12: Improved resistance to chloride corrosion
Surface Condition Options
Titanium sheets can be supplied in different surface finishes depending on application:
- Hot rolled surface
- Cold rolled surface
- Pickled finish
- Polished surface
- Sandblasted surface
Tolerance and Processing Standards
Standard titanium sheet production typically follows strict tolerance requirements:
- Thickness tolerance: ±0.02 mm to ±0.2 mm (depending on grade)
- Width tolerance: ±2 mm
- Length tolerance: ±3 mm
- Flatness: Controlled for precision machining applications
Common Applications by Size
Thin Sheets (0.3–1.0 mm)
- Chemical lining systems
- Medical implants
- Precision electronic components
Medium Sheets (1.0–3.0 mm)
- Heat exchangers
- Marine equipment
- Industrial fabrication
Thick Plates (3.0 mm+)
- Aerospace structures
- Pressure vessels
- Heavy engineering components
Product Inquiry
Relevant Products
TIANJIN TEDA GANGHUA
Tel: +86 22 86896631
Phone: +86 15822676888
Fax: +86 22 86896632
E-mail: sales1@tedaganghua.com
Office Hours:Mon – Fri / 9:00 AM – 6:00 PM
Address:Beichen Industrial Area, Beichen District, Tianjin 300400 China
Room A3101, Section 2, No. 122, Dongting Road, Tianjin Development Zone
Leave a message online
Copyright © 2023 TIANJIN TEDA GANGHUA