Products
Contact Us
1mm Thick Stainless Steel Sheet
Keywords:
Category:
Product Details
A 1mm thick stainless steel sheet is widely used in industries such as construction, kitchen equipment, decorative panels, and light industrial manufacturing. Because of its relatively thin thickness, this type of stainless steel sheet is typically produced using cold rolling processes rather than hot rolling. Cold rolling allows manufacturers to achieve higher precision, smoother surfaces, and tighter thickness tolerances, which are essential for thin stainless steel products.
Is 1mm Stainless Steel Sheet Cold Rolled or Hot Rolled?
In most cases, 1mm stainless steel sheets are cold rolled. Hot rolling is generally used to produce thicker stainless steel plates, while cold rolling is used for thinner sheets.
| Rolling Process | Typical Thickness Range | Characteristics |
|---|---|---|
| Hot Rolled Stainless Steel | Usually above 3–6 mm | Rougher surface, lower dimensional precision |
| Cold Rolled Stainless Steel | 0.3 mm – 3 mm | Smooth surface, high precision, better flatness |
Because 1 mm stainless steel sheet requires accurate thickness control, the cold rolling process is the preferred manufacturing method.
Manufacturing Process of 1mm Stainless Steel Sheet
The production of thin stainless steel sheets involves several steps to achieve the required thickness and surface quality.
1. Raw Material Preparation
Stainless steel slabs are first produced through steelmaking and casting processes.
2. Hot Rolling (Initial Stage)
The slab is heated and hot rolled into a thicker coil to reduce its thickness and prepare it for further processing.
3. Pickling
The hot rolled coil is treated with acid to remove scale and surface oxidation.
4. Cold Rolling
The steel is rolled at room temperature through precision rollers to gradually reduce the thickness to 1 mm. This process improves both surface finish and dimensional accuracy.
5. Annealing
Heat treatment is applied to restore ductility and remove internal stresses created during cold rolling.
6. Surface Finishing
The sheet may undergo polishing, brushing, or other finishing processes depending on the required surface appearance.
7. Cutting and Leveling
Finally, the coil is flattened and cut into standard sheet sizes or customized dimensions.
Typical Surface Finishes for 1mm Stainless Steel Sheets
Thin stainless steel sheets often require specific surface treatments to improve appearance or functionality.
Common finishes include:
2B Finish – Smooth, standard industrial surface
BA (Bright Annealed) – Reflective surface finish
No.4 Brushed Finish – Satin texture used for decorative applications
Mirror Finish – Highly polished reflective surface
Common Applications
Due to its light weight and good formability, 1mm thick stainless steel sheet is commonly used in:
Kitchen equipment and appliances
Elevator interior panels
Decorative wall panels
Metal furniture components
Industrial enclosures and cabinets
Product Inquiry
Relevant Products
TIANJIN TEDA GANGHUA
Tel: +86 22 86896631
Phone: +86 15822676888
Fax: +86 22 86896632
E-mail: sales1@tedaganghua.com
Office Hours:Mon – Fri / 9:00 AM – 6:00 PM
Address:Beichen Industrial Area, Beichen District, Tianjin 300400 China
Room A3101, Section 2, No. 122, Dongting Road, Tianjin Development Zone
Leave a message online
Copyright © 2023 TIANJIN TEDA GANGHUA