Products
Contact Us
Stainless Steel Strip 3mm
Keywords:
Category:
Product Details
A 3 mm stainless steel strip refers to a narrow strip of stainless steel material with a thickness of approximately 3 millimeters. Stainless steel strips are typically produced by slitting stainless steel coils into narrower widths, allowing them to be used in various industrial and manufacturing applications. These strips provide excellent strength, corrosion resistance, and formability, making them suitable for many fabrication processes.
Common Widths of Stainless Steel Strips
Stainless steel strips are generally defined by their narrow width compared with standard sheets or plates. The width can vary depending on the application and production method.
| Width Category | Typical Width Range |
|---|---|
| Narrow Strip | 10 mm – 100 mm |
| Medium Strip | 100 mm – 300 mm |
| Wide Strip | 300 mm – 600 mm |
In many industrial applications, stainless steel strips are custom cut from coils to meet specific width requirements, so widths can also be tailored to precise specifications.
Common Thickness and Size Specifications
Stainless steel strips are available in a variety of thicknesses and sizes depending on the manufacturing process.
| Thickness Range | Typical Use |
|---|---|
| 0.1 mm – 0.5 mm | Precision components and electronics |
| 0.5 mm – 1.5 mm | Springs, clips, and light fabrication |
| 1.5 mm – 3 mm | Structural parts and industrial components |
| 3 mm and above | Heavy-duty strips and mechanical parts |
A 3 mm stainless steel strip is considered relatively thick compared with most strip products and is often used where higher strength and durability are required.
Standard Coil and Slitting Sizes
Stainless steel strips are usually produced from large coils and then slit into narrower widths. Typical coil dimensions include:
Coil width: 1000 mm, 1219 mm, 1250 mm, or 1500 mm
Custom slit width: according to customer requirements
Coil weight: commonly 3–10 tons per coil
The slitting process ensures that the strips maintain consistent width, smooth edges, and accurate dimensions.
Common Stainless Steel Grades for Strips
Stainless steel strips can be manufactured using several grades depending on the required corrosion resistance and mechanical properties.
Common grades include:
201 Stainless Steel – economical and widely used for decorative applications
304 Stainless Steel – excellent corrosion resistance and general industrial use
316 Stainless Steel – superior corrosion resistance for marine or chemical environments
430 Stainless Steel – ferritic stainless steel often used in appliances
Applications of 3 mm Stainless Steel Strips
Because of their strength and corrosion resistance, thicker stainless steel strips are commonly used in:
Industrial equipment components
Structural reinforcement parts
Metal fabrication and brackets
Automotive and machinery parts
Construction and architectural fittings
Product Inquiry
Relevant Products
TIANJIN TEDA GANGHUA
Tel: +86 22 86896631
Phone: +86 15822676888
Fax: +86 22 86896632
E-mail: sales1@tedaganghua.com
Office Hours:Mon – Fri / 9:00 AM – 6:00 PM
Address:Beichen Industrial Area, Beichen District, Tianjin 300400 China
Room A3101, Section 2, No. 122, Dongting Road, Tianjin Development Zone
Leave a message online
Copyright © 2023 TIANJIN TEDA GANGHUA