Products
Contact Us
202 Stainless Steel Sheet
Keywords:
Category:
Product Details
202 stainless steel sheet is a cost-effective austenitic stainless steel widely used as an alternative to 304. It belongs to the 200 series stainless steels, where part of the nickel (Ni) is replaced by manganese (Mn) and nitrogen (N) to reduce cost while maintaining acceptable performance.
1. Chemical Composition of 202 Stainless Steel
The properties of 202 stainless steel are defined by its alloy composition:
| Element | Content (%) | Function |
|---|---|---|
| Chromium (Cr) | 17 – 19 | Provides corrosion resistance |
| Nickel (Ni) | 4 – 6 | Stabilizes austenitic structure |
| Manganese (Mn) | 7.5 – 10 | Replaces part of nickel, improves strength |
| Nitrogen (N) | ≤ 0.25 | Enhances strength and hardness |
| Carbon (C) | ≤ 0.15 | Affects strength and weldability |
| Silicon (Si) | ≤ 1.0 | Improves oxidation resistance |
| Phosphorus (P) | ≤ 0.06 | Impurity control |
| Sulfur (S) | ≤ 0.03 | Improves machinability |
2. Key Properties of 202 Stainless Steel Sheet
2.1 Corrosion Resistance
Moderate corrosion resistance
Suitable for indoor and mild environments
Lower resistance compared to 304 and 316
2.2 Mechanical Strength
Higher strength than 304 due to manganese and nitrogen
Good hardness and wear resistance
Suitable for structural and decorative applications
2.3 Formability and Processing
Good formability for bending and stamping
Suitable for cold working processes
Slightly harder to form than 304
2.4 Weldability
Acceptable weldability
Not as stable as 304 or 316 after welding
Requires controlled processing for best results
2.5 Cost Advantage
Reduced nickel content lowers material cost
Widely used in price-sensitive markets
Competitive alternative to 300 series stainless steel
3. Comparison with 304 Stainless Steel
| Feature | 202 Stainless Steel | 304 Stainless Steel |
|---|---|---|
| Corrosion Resistance | Moderate | Good |
| Nickel Content | Low (4–6%) | Higher (8–10.5%) |
| Strength | Higher | Moderate |
| Cost | Lower | Higher |
| Application Range | Limited | Very wide |
4. Typical Thickness Range
| Product Type | Thickness |
|---|---|
| Cold Rolled Sheet | 0.3 – 3 mm |
| Hot Rolled Plate | 3 – 20 mm |
5. Common Applications of 202 Stainless Steel Sheet
Due to its balance of cost and performance, 202 stainless steel is widely used in:
5.1 Decorative Applications
Interior wall panels
Decorative sheets and trims
Furniture surfaces
5.2 Household Products
Kitchen utensils (non-critical use)
Storage racks
Appliances (non-corrosive environments)
5.3 Architectural Use
Indoor structures
Handrails and railings
Door and window frames
5.4 Industrial Applications
Light structural components
Transport equipment (low corrosion exposure)
6. Limitations of 202 Stainless Steel
Not suitable for marine or coastal environments
Lower resistance to acids and chlorides
May show rust in humid or harsh conditions
7. How to Choose 202 Stainless Steel Sheet
Choose 202 stainless steel when:
Cost control is important
Application is indoors or low-corrosion
High strength is required
Surface decoration is the main purpose
Avoid using 202 when:
High corrosion resistance is required
Long-term outdoor exposure is expected
Product Inquiry
Relevant Products
TIANJIN TEDA GANGHUA
Tel: +86 22 86896631
Phone: +86 15822676888
Fax: +86 22 86896632
E-mail: sales1@tedaganghua.com
Office Hours:Mon – Fri / 9:00 AM – 6:00 PM
Address:Beichen Industrial Area, Beichen District, Tianjin 300400 China
Room A3101, Section 2, No. 122, Dongting Road, Tianjin Development Zone
Leave a message online
Copyright © 2023 TIANJIN TEDA GANGHUA