Products
Contact Us
6082 Aluminium Sheet
Keywords:
Category:
Product Details
6082 aluminium sheet is a heat-treatable 6000 series alloy (Al-Mg-Si system) known for its high strength, good corrosion resistance, and excellent machinability. It is widely used in structural engineering and load-bearing applications where mechanical performance is critical.
Compared with 5xxx series alloys, 6082 achieves higher strength through heat treatment (T6/T651 condition) rather than work hardening.
1. Chemical Composition of 6082 Aluminium
| Element | Content (%) |
|---|---|
| Aluminium (Al) | Balance |
| Magnesium (Mg) | 0.6 – 1.2 |
| Silicon (Si) | 0.7 – 1.3 |
| Manganese (Mn) | 0.4 – 1.0 |
| Iron (Fe) | ≤ 0.5 |
| Chromium (Cr) | ≤ 0.25 |
| Copper (Cu) | ≤ 0.1 |
Key Alloying Functions
- Magnesium (Mg): Provides strength through precipitation hardening
- Silicon (Si): Forms Mg₂Si phase for heat treatment response
- Manganese (Mn): Improves grain structure and toughness
2. Mechanical Properties of 6082 Aluminium Sheet (T6)
| Property | Typical Value |
|---|---|
| Tensile Strength | 290 – 340 MPa |
| Yield Strength | 240 – 300 MPa |
| Elongation | 8 – 12% |
| Hardness | Medium-high |
Key Feature:
6082 is one of the highest strength alloys in the 6000 series, especially suitable for structural use.
3. Key Performance Characteristics
3.1 High Strength
- Strong structural performance
- Suitable for load-bearing applications
3.2 Good Corrosion Resistance
- Performs well in atmospheric environments
- Suitable for outdoor engineering structures
3.3 Excellent Machinability
- Easy to machine and fabricate
- Widely used in precision engineering
3.4 Good Weldability
- Can be welded using MIG and TIG
- Strength reduction may occur in heat-affected zones
4. Common Applications of 6082 Aluminium Sheet
Structural Engineering
- Bridges and support structures
- Building frameworks
- Load-bearing platforms
Transportation Industry
- Truck chassis and trailers
- Railway structural parts
- Automotive structural components
Industrial Equipment
- Machinery frames
- Engineering base plates
- Mechanical components
Marine Applications
- Deck structures
- Offshore support systems
- Marine frameworks
5. Difference Between 6000 Series and 5000 Series Aluminium
5.1 Strength Mechanism
| Series | Strength Method | Key Alloying Element |
|---|---|---|
| 5000 Series | Work hardening | Magnesium (Mg) |
| 6000 Series | Heat treatment (T6) | Magnesium + Silicon |
👉 6000 series achieves higher structural strength through heat treatment, while 5000 series relies on cold working deformation.
5.2 Mechanical Performance
| Feature | 5000 Series | 6000 Series |
|---|---|---|
| Strength | Medium to high | High |
| Hardness | Moderate | Higher (T6 condition) |
| Machinability | Good | Very good |
| Weldability | Excellent | Good |
5.3 Corrosion Resistance
| Series | Performance |
|---|---|
| 5000 Series | Excellent (especially marine grade) |
| 6000 Series | Good, but slightly lower than 5000 |
👉 5000 series performs better in marine and saltwater environments.
5.4 Typical Applications
| Series | Main Use |
|---|---|
| 5000 Series | Marine structures, tanks, panels |
| 6000 Series | Structural engineering, machinery, transportation |
6. Key Summary
- 5000 series: Best corrosion resistance + good formability
- 6000 series: Higher strength + heat-treatable structural alloy
- 6082 represents one of the strongest 6000 series structural grades
Product Inquiry
Relevant Products
TIANJIN TEDA GANGHUA
Tel: +86 22 86896631
Phone: +86 15822676888
Fax: +86 22 86896632
E-mail: sales1@tedaganghua.com
Office Hours:Mon – Fri / 9:00 AM – 6:00 PM
Address:Beichen Industrial Area, Beichen District, Tianjin 300400 China
Room A3101, Section 2, No. 122, Dongting Road, Tianjin Development Zone
Leave a message online
Copyright © 2023 TIANJIN TEDA GANGHUA