language

Home

Products

Ss Coil 304

SS coil 304 can be ordered quickly when the material grade, dimensions, surface, quantity, and delivery requirements are

Keywords:

Ss Coil 304

Category:

Stainless Steel Sheet / Plate

Industrial Stainless Steel Sheet

Hot Rolled Stainless steel sheet

Inquiry Now

Send E-mail

File Download

sales1@tedaganghua.com

+86 22 86896631、+86 15822676888

Product Details

SS coil 304 can be ordered quickly when the material grade, dimensions, surface, quantity, and delivery requirements are confirmed in the right sequence. For most buyers, the fastest path from an online search to a purchase order is not a long technical review. It is a five-step specification check that removes ambiguity before quotation.

Step 1: Confirm the Basic Specification

Start with four essential parameters: thickness, width, surface finish, and coil weight. The grade and applicable standard should also be stated clearly in the inquiry.

Item	Common Specification	What to Confirm
Grade	304 / 304L	ASTM, EN, JIS or project standard
Thickness	0.3–3.0 mm	Required nominal thickness and tolerance
Width	600–1524 mm	Full width or slit width
Surface	2B / BA / No.1	Finish and surface requirements
Coil weight	Typically several tons per coil	Maximum weight accepted by your equipment

A complete inquiry is much easier to process when written in one line, such as: 304 stainless steel coil, 1.0 × 1219 mm, 2B, specified coil weight, required quantity, applicable standard.

Step 2: Decide How the Coil Will Be Delivered

Not every buyer needs a full master coil. The required delivery form should be decided before requesting a quotation.

Delivery Form	Suitable When	Important Check
Full coil	Large-volume production	Coil OD, ID and maximum weight
Slit coil	Narrow-width processing	Slit width and width tolerance
Cut-to-length sheets	Sheet fabrication	Sheet length, width and flatness

If the buyer has a slitting or decoiling line, a master coil may provide greater flexibility. If the buyer does not have suitable equipment, slit coils or cut sheets can reduce additional processing work.

Five Commonly Requested Combinations

For general fabrication and forming applications, the following combinations are often practical starting points for an inquiry:

Thickness	Width	Surface	Typical Direction
0.5 mm	1219 mm	2B	Light forming and fabrication
0.8 mm	1219 mm	2B	General sheet processing
1.0 mm	1219 mm	2B	General fabrication
1.2 mm	1219 mm	2B	Formed components
1.5 mm	1219 mm	2B	Equipment and structural fabrication

Step 3: Confirm Delivery Requirements

Delivery time depends on whether the requested specification is available from stock or requires production. A commonly used planning reference is several business days for available stock and several weeks for production orders. Exact lead time should be confirmed against the required grade, dimensions, quantity, processing, inspection, and shipping destination.

For urgent projects, state the required arrival date rather than simply asking for the fastest shipment. This allows the supplier to check production, processing, packing, and transportation together.

Step 4: Request a Complete Quotation

A useful quotation should make the commercial scope clear. Instead of asking only for a unit price, provide the complete specification and request confirmation of the following items:

Material grade and applicable standard
Thickness, width and tolerance
Surface finish and edge condition
Coil weight and quantity
Processing requirements such as slitting or cut-to-length
Inspection and material certificate requirements
Packing and shipping terms

This approach reduces the risk of receiving a low initial quotation that later changes because of processing, inspection, packing, or non-standard specification requirements.

Step 5: Turn the Quotation into a Purchase Order

Once the technical and commercial details have been confirmed, the purchase order should repeat the essential specification rather than referring only to a previous conversation.

Simple PO Specification Template

Product: 304 Stainless Steel Coil

Standard: [Required Standard]

Size: [Thickness] × [Width] mm

Surface: [2B / BA / Other]

Edge: [Slit Edge / Mill Edge]

Quantity: [Tons / Coils]

Coil Weight: [Required Range]

Inspection Documents: [MTR / Inspection Report]

Packing: [Required Method]

Delivery: [Required Date / Destination]

Three First-Order Mistakes to Avoid

1. Leaving Out the Width

Writing only “304 coil, 1.0 mm” is incomplete. Width determines processing compatibility, yield, slitting requirements, and transportation details. Always specify the width or state that it can be proposed by the supplier.

2. Choosing the Surface Too Late

2B, BA, No.1, brushed, and other finishes are not interchangeable for every application. Decorative parts, forming components, and general industrial parts may require different surface conditions.

3. Ignoring Coil Weight

A coil that is technically correct may still be unsuitable if it exceeds the buyer's decoiler, crane, slitting-line, or transportation limits. Maximum coil weight should therefore be confirmed before production.

Teda Ganghua Supply Support

For buyers who already know the required specification, Teda Ganghua can support the process from specification confirmation through processing and export delivery. Stainless steel products can be supplied according to grade, thickness, width, surface finish, coil configuration, cutting or slitting requirements, and project documentation.

The most efficient inquiry is usually the most complete one. Providing the grade, standard, size, finish, quantity, coil weight, delivery destination, and required documents in the first message allows the supplier to move directly to technical confirmation and quotation.

FAQ

What information is essential when ordering a 304 stainless steel coil?

At minimum, specify the grade, standard, thickness, width, surface finish, quantity, and required delivery form. Coil weight and tolerance should also be included when equipment compatibility is important.

Is 1219 mm a common coil width?

Yes. 1219 mm is a commonly requested width in some international markets, particularly where imperial-width sheet utilization is relevant. Actual availability depends on thickness, finish, production schedule, and supplier stock.

Should I order a full coil or slit coil?

Choose a full coil when your equipment can process the master width and weight. Choose a slit coil when your production line requires narrower widths and you want to reduce in-house slitting work.

How quickly can a stainless steel coil be delivered?

Stock specifications can often be processed and dispatched faster than production orders. The actual lead time depends on stock status, processing, inspection, packing, destination, and shipping schedule.