Products
Contact Us
Cold Rolled Stainless Steel sheet
Stainless steel 310 plate is a high-performance heat-resistant material designed for extreme industrial environments.
304L and 304H stainless steel plates are both based on the 304 family but designed for different service conditions:
304L focuses on weldability and corrosion resistance
304H focuses on high-temperature strength
ASTM A240 plate is a stainless steel material standard covering a wide range of corrosion-resistant and heat-resistant grades used in industrial and engineering applications.
309 stainless steel sheet is a high-temperature austenitic stainless steel offering strong oxidation resistance and reliable performance under thermal stress.
SS 430 stainless steel sheet is the most cost-effective option among these three grades, while 410 and 420 offer progressively higher strength and hardness at increasing cost levels.
430 → Best for cost-sensitive and decorative applications
410 → Balanced strength for industrial mechanical use
420 → High hardness for cutting and wear-resistant applications
316 2B stainless steel is a high-performance corrosion-resistant sheet material widely used in industrial, marine, food, and architectural applications.
410 stainless steel sheets are martensitic, heat-treatable stainless steel designed for applications where hardness, wear resistance, and mechanical durability are critical.
321 stainless steel sheets are a titanium-stabilized austenitic grade designed for high-temperature and welded applications.
304L stainless steel sheets are a low-carbon, austenitic grade offering:
Excellent corrosion resistance
Superior weldability without risk of sensitization
Good mechanical properties and ductility
Versatility in chemical, industrial, architectural, and decorative applications
The high surface demand for 304 stainless steel is due to its combination of:
Excellent corrosion resistance
Ease of fabrication and polishing
Versatility in industrial and decorative applications
Cost-effectiveness compared to higher-end grades
Wide availability and standardized finishing options
3mm stainless steel sheet is a versatile medium-thickness material widely used across industrial, construction, and decorative applications.
Standard sheet sizes are usually 4x8 feet (1219x2438 mm), with larger sizes up to 2x6 meters for industrial projects.
Stainless steel grades 304, 316L, 430, 201, and 420 are commonly available in 3mm thickness.
Coils are used for custom sheet cutting or continuous processing.
202 stainless steel sheet is a cost-effective material with:
Reduced nickel content and higher manganese
Good strength and acceptable corrosion resistance
Suitable for decorative and indoor applications
TIANJIN TEDA GANGHUA
Tel: +86 22 86896631
Phone: +86 15822676888
Fax: +86 22 86896632
E-mail: sales1@tedaganghua.com
Office Hours:Mon – Fri / 9:00 AM – 6:00 PM
Address:Beichen Industrial Area, Beichen District, Tianjin 300400 China
Room A3101, Section 2, No. 122, Dongting Road, Tianjin Development Zone
Leave a message online
Copyright © 2023 TIANJIN TEDA GANGHUA