Products
Contact Us
AISI 201 304 mirror 8k stainless steel sheet
Keywords:
Category:
Product Details
8k stainless steel sheet
BA / 8K Mirror polish finish is a high gloss, polished stainless steel; It is designed for architectural applications; however, artists and others find many creative uses for this mirror finish product. Because of its uniform consistency, #8 Non-Directional is excellent for panel-to-panel matching. It is highly reflective making it suitable for mirrors, wall panels, coping and trim.
Common Thickness : 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.2, 1.5, 2.0, 2.5, 3.0MM
Special Thickness: 4, 5, 6, 8, 10, 12MM
Size: 1000X2000MM; 1220X2440MM; 1250X2500MM, 1500X3000MM
Package: Standard export package with metal pallet or as requirement;
8k stainless steel sheet
Mirror finish sheet can be supplied with different colors as Golden, Rose gold, Black, Brown, Bronze, Champagne or as customer requirement.
BA / 8K mirror finish is widely obtainable in Type 201, 304, 316L, 430;
For the best results over time, selection of the proper grade of Mirror Finish is important.
Type 304, for most environments, is sufficient to prevent corrosion.
Type 316 should be used near the seacoast.
Low carbon grades (304L / 316L) should be used when parts are to be welded.
For extreme locations, e.g. near chemical plants or where steel may come into contact with salt water spray, different alloys will be required, subject to application review.
BA / 8K Mirror polish surface is supplied to the standard commercial allowances of ASTM (American Society for the Testing of Materials).
To avoid affecting the highly reflective mirror finish surface, joinery should be mechanical. If welding or soldering must be employed, strive to limit it to hidden areas. Heat tint scales and soldering flux residue must be thoroughly removed. 8K Mirror polish finish is slightly directional. Therefore, it is advisable to orient panels in the same direction.
BA / 8K Mirror polish sheet comes with a protective PVC covering that is high grade UV resistant and is designed to withstand the elements for several weeks. Yet it is recommended that this PVC covering be removed immediately after installation to prevent adhesive residue from adhering to the polished stainless steel mirror finish. 8K Mirror polish’s appearance is very uniform, but any metal surface, including a painted one, is sensitive to misalignment of panels on differing planes. Please take extra care to install within reasonable tolerances to ensure full benefit of 8K Mirror polish’s unvarying appearance. After installation, any rust stains from tools or construction debris must be removed.
BA / 8K Mirror polish sheet is designed to be essentially maintenance free. It will last for decades without requiring attention. Yet it may be appropriate at times to clean the surface in order to maintain its original appearance. Specific stainless steel agents are widely available. For general cleaning, any detergent or ammonia solution is effective. Also, for stains, a sodium carbonate paste with a warm water rinse can be applied. For severe stains, you may use tri-sodium phosphate and caustic soda solutions. More difficult contaminants, like adhesive residue, will come off with pure acetone. Always avoid products containing chloride. Regularly clean out areas where occasional debris may collect, such as gutters.
8k stainless steel sheet
Product Inquiry
Relevant Products
TIANJIN TEDA GANGHUA
Tel: +86 22 86896631
Phone: +86 15822676888
Fax: +86 22 86896632
E-mail: sales1@tedaganghua.com
Office Hours:Mon – Fri / 9:00 AM – 6:00 PM
Address:Beichen Industrial Area, Beichen District, Tianjin 300400 China
Room A3101, Section 2, No. 122, Dongting Road, Tianjin Development Zone
Leave a message online
Copyright © 2023 TIANJIN TEDA GANGHUA