Products
Contact Us
5754 7075 2024 6061 t6 6063 6082 6068 Aluminum Round Bar/Rod Wholesale from China Supplier
Keywords:
Category:
Product Details
Introduction
Aluminum bar is produced through an extrusion process and is elongated using dies. Aluminum bar can be produced into a variety of different shapes and can be used for many different industrial applications. Aluminum bar has many different uses and industrial applications due to its light weight, corrosion resistance, and excellent machinability.
Common Grades & Uses
Aluminum: 2024, 5052, 6061, 6063, 7075 (e.g., aerospace, automotive, marine, electrical, transportation).
Stainless Steel: 304, 316, 430, 420 (e.g., medical, construction, food service, manufacturing, oil & gas).
Food & Medical Applications
Stainless steel is preferred for food service and medical use due to its non-reactive, easy-to-clean surface.
Aluminum is common in cookware but can react with acidic foods and is more porous.
Cost Considerations
Prices for both metals fluctuate based on market conditions.
Stainless steel is often cheaper when sourced from recycled materials.
Aluminum’s cost is influenced by electricity-intensive processing but may be more economical by volume due to its lower weight.
Size Range
2XXX Series
|
Al-Alloy |
Stretching Test |
Elongation A% |
Hardness HB |
Produce Sizes |
|||||||
|
Temper |
Tensile Strength Rm/Mpa |
Yield Strength Rp0.2/Mpa |
Temper |
OD |
ID |
Diagonal |
A/F |
Length |
|||
|
2014 |
O |
<245 |
<125 |
>12 |
45 |
O T3/T351 T4/T451 T6/T8 F |
3mm~ 130mm |
3mm~ 100mm |
3mm~ 130mm |
5mm~ 112mm |
1000mm~ 6000mm |
|
T4 |
>345 |
>245 |
>12 |
110 |
|||||||
|
T6 |
>345 |
>245 |
>12 |
140 |
|||||||
|
2017 |
O |
<245 |
<125 |
>16 |
45 |
||||||
|
T4 |
>345 |
>215 |
>12 |
110 |
|||||||
|
2024 |
O |
<245 |
<125 |
>12 |
47 |
||||||
|
T4 |
>410 |
>305 |
>12 |
120 |
|||||||
|
T6 |
>345 |
>245 |
>12 |
130 |
|||||||
5XXX Series
|
Al-Alloy |
Temper |
Stretching Test |
Hardness HB |
Temper |
Produce Sizes |
||||||
|
Tensile Strength Rm/Mpa |
Yield Strength Rp0.2/Mpa |
Elongation A% |
OD |
ID |
Diagonal |
A/F |
Length |
||||
|
5052 |
H112 |
>175 |
>70 |
>16 |
50 |
H111 H112 H32 H34 F |
3mm~ 130mm |
3mm~ 100mm |
3mm~ 130mm |
5mm~ 112mm |
1000mm~ 6000mm |
|
O |
175-245 |
>70 |
>20 |
40 |
|||||||
|
5454 |
H112 |
>215 |
>85 |
>12 |
55 |
||||||
|
O |
215-285 |
>85 |
>14 |
40 |
|||||||
|
5056 |
H112 |
>270 |
>105 |
>12 |
80 |
||||||
|
H34 |
>345 |
>280 |
>9 |
80 |
|||||||
|
5754 |
H112 |
>220 |
>90 |
>12 |
60 |
||||||
|
5083 |
H112 |
>275 |
>110 |
>12 |
85 |
||||||
|
O |
<355 |
>120 |
>14 |
50 |
|||||||
|
5086 |
H112 |
>275 |
>110 |
>12 |
85 |
||||||
|
O |
<355 |
>120 |
>14 |
50 |
|||||||
6XXX Series
|
Al-Alloy |
Temper |
Stretching Test |
Hardness HB |
Temper |
Produce Sizes |
||||||
|
Tensile Strength Rm/Mpa |
Yield Strength Rp0.2/Mpa |
Elongation A% |
OD |
ID |
Diagonal |
A/F |
Length |
||||
|
6061 |
O |
<145 |
<110 |
>16 |
30 |
O T4 T6/T651 T8 F |
3mm~ 130mm |
3mm~ 100mm |
3mm~ 130mm |
5mm~ 112mm |
1000mm~ 6000mm |
|
T5 |
>175 |
>130 |
>16 |
65 |
|||||||
|
T6 |
>265 |
>245 |
>8 |
95 |
|||||||
|
6063 |
T4 |
>130 |
>65 |
>15 |
50 |
||||||
|
T5 |
>175 |
>130 |
>8 |
65 |
|||||||
|
T6 |
>215 |
>170 |
>10 |
80 |
|||||||
|
6082 |
T6 |
>310 |
>260 |
>6 |
95 |
||||||
7XXX Series
|
Al-Alloy |
Temper |
Stretching Test |
Hardness HB |
Temper |
Produce Sizes |
||||||
|
Tensile Strength Rm/Mpa |
Yield Strength Rp0.2/Mpa |
Elongation A% |
OD |
ID |
Diagonal |
A/F |
Length |
||||
|
7003 |
T5 |
>285 |
>245 |
>10 |
110 |
O T73 T6/T651 T8 F |
3mm~ 130mm |
3mm~ 100mm |
3mm~ 130mm |
5mm~ 112mm |
1000mm~ 6000mm |
|
7005 |
T6 |
>400 |
>350 |
>12 |
130 |
||||||
|
7022 |
T6 |
>460 |
>380 |
>8 |
130 |
||||||
|
7050 |
T73 |
>490 |
>430 |
>9 |
140 |
||||||
|
7075 |
T6 |
>540 |
>480 |
>7 |
150 |
||||||
|
7055 |
T6 |
>650 |
>600 |
>8 |
170 |
||||||
Temper
|
Annealing |
TO |
|||||||
|
Hot work |
T1 |
H111 |
H112 |
|
||||
|
Cold work |
H12 |
H14 |
H16 |
H18 |
H32 |
H34 |
H116 |
H321 |
|
Heat treatment |
T3 |
T4 |
T5 |
T6 |
T8 |
|
|
|
|
Over aging treatment |
T73 |
T74 |
T76 |
T79 |
|
|
|
|
|
Stress relieved |
T351 |
T451 |
T651 |
T7351 |
T7451 |
T7651 |
T7951 |
T851 |
Characteristic
- Alloy Series: 2000 Series(Al-Cu Alloy)
This alloy belongs to hard alloy.Has excellent mechanical properties and machinability, commonly used in aviation components, transport equipment, equipment components and other structural materials.
- Typical Alloy:2014,2017,2024
- Temper:T3, T351,T4,T451,T6,T651,T6511,T7351
- Features :Not good corrosion resistance, but high strength,excellent plasticity, widely used in ctural materials.
- Applications:Military, mold, aircraft structure,Rivets, truck wheels, propellercomponents and various other structural parts.
- Alloy Series: 5000 Series(Al-Mg Alloy)
By adding main element Mg,Has excellent processability, weldability and corrosion resistance, commonly used in decorative materials, appliance materials, can lid materials and a variety of structural materials
- Typical Alloy:5A02 5A03 5A05 5A06 5052 5056 5083
- Temper:O F H12 H14 H22 H24 H32 H34 H38 H111 H112
- Features :Strength is higher than 1100 series by 10%,Has excellent formability, weldability and corrosion resistance of the alloy.
- Applications:Heat Sink Plate Electronic products shell Rail Tank body
- Alloy Series: 6000 Series(Al-Mg-Si Alloy)
This alloy has a moderate strength, a certain degree of corrosion resistance, high processability. Good Oxidation color and other advantages make it the most widely used alloy.
- Typical Alloy:6A02 6061 6063 6082
- Temper:T3 T351 T4 T451 T6 T651 T6511 T7351
- Features :Through heat treatment, can get excellent strength and performance, low tendency of stress corrosion cracking, its excellent weldability, corrosion resistance and good cold processablity make it wide applications with a
promiment future. Can be anodized coloring, but also painted enamel, to adapt to building decoration materials.
- Applications:Electronic products shell car parts Sports Equipment Rail.
- Alloy Series: 7000 Series(Al-Zn-Mg-Cu Alloy)
This alloy has currently the highest strength, can replace carbon steel, widely used in military, aerospace. Due to the oxidation of the surface having a breakthrough in recent years, it has been used by civilian.
- Typical Alloy:7A04 7050 7055 7075
- Temper:T3, T351,T4,T451,T6,T651,T6511,T7351
- Features :Mechanical properties are the highest in aluminum, corrosion resistance is relatively poor, can be improved through the process.
- Applications:Mold manufacturing Aircraft structural parts with plate Free Forging and Die Forging car parts Sports Equipment.



Our Strength
Technologies:Top polishing technology guarantees good luster and smooth surface.
Markets: Obtain market sharing all over the world.
Equipment:Advanced cutting line to provide a wide range of specifications.
Production capacity:650, 000 tons annually in total.
Responsibility: Engaged in charity donation and provide eco-friendly products.
Packaging
Our aluminum products meet the export standard. Plastic film and brown paper can be covered at customers’ need. What’s more, wooden case or wooden pallet is adopted to protect products from damage during the delivery. There are two kinds of packaging, which is eye to wall or eye to sky. Customers can choose either of them for their convenience. Generally speaking, there are 2 tons in one package, and loading 18-22 tons in 1×20′ container, and 20-24 tons in 1×40′ container.




Product Inquiry
Relevant Products